Autoleveller

hi fredeopopo,
the problem i had was on an actual workpiece. then i tried to find out the problem and posted the ogf. maybe i did a mistake there, but the problem remains with the short line, with z below zero..

sorry for the late answer, i was on holidays. i am using the newest version. the file is right, i just tested it again, in my autoleveller it works. it is just one 5mm long line with a ramp in and out. but the z height is the same on the 5mm long path although the z heights in the probe file are dif...

hello, i am engraving stainless steel handles 10mm wide 140mm long. these are not very straight and therefor i use the autoleveller software. however i ran into a problem with 5mm long lines along the y axis (x axis is the 140mm long side of the handle). the handles are not level in the y direction....

hi james,
thanks for your suggestion.
i was trying the ae version and installed java8 on windows7, the offline version. however i do not get the programm to run, even though i tried the cmd.
attached the error message from the console.
the .exe also does not work.

any idea?

thanks,
michael

hi james, i use the normal autoleveller and i know how to use it. i did already do quite a bit of work with it. i was wondering why the software cannot calculate the x y dimensions with very simular geometry and the same cam and postprocessor. in some cases it works and some cases not. i dont find t...

hello, i have a very strange problem. autlleveller cannot calculate the x lenght and y length of a gcode in some cases although it was made by the same cam and postprocessor, and the same geometry. here are the examples: https://www.dropbox.com/sh/72r60xydzvl0ngn/AAB1rfHiG2Fsr9HZbksz8_GXa?dl=0 i tri...

thanks.

thanks so i wait for the new version. you know when it will be released?

thanks, i can understand the 4th axis is a lot of work and hardly anybody uses it.

but getting bigger line segments is that possible?

michael

by the way, if this would not be possible, can autoleveler also handle code with an a axis in the gcode?