Autoleveller

Ok, I figured the problem would be for some of that, that's why I specified that my machine is usb, I'm going to ask the vendor if it has parallel port control.
thank you very much for your help

Sory but It does not work that code gives me this error:


The electronic I have I think is a little garbage.
Driver Motor:
YOC-TG5X3-USB
Control:
YOOCNC
M3-USB-JB4
VO4

Hello, I tried the settings and it doesn't work, they follow the same problems
I think that software autoleveller has a bug whit my machine

In the 'Motor Home/Soft Limits' screen, try marking the 'Reversed' field for Z axis, see if that makes a difference. I have modified that parameter and it is shared equally. I don't know if you'll see it in the video but when the machine do the probing routine, sometimes all three axes move at the ...

- By lowering the XYfeed, you no longer have issues with acceleration or missing steps Yes, it seems to work fine - Lowering the Probe safe height eliminates any software limit errors Yes, it apparently that works like this - Probing seems to work OK Yes, the probing work fine, i use this code: 'ch...

Ok, now it doesn't accelerate and not it loses steps, but it still doesn't work, I have verified that I have to change the parameter "Prove Safe Height" and lower it so that it doesn't give me the error of limits, but it doesn't work fine. When starting the work starts fine, but in the course of the...

daedelus wrote:Absolutely,

Even the free version of AE has the option of changing the XY Feed.

But the problem I don't have in the speed of the Z axis, it is in the speed of the axis Y and X, if you see the video you will see that it doesn't work in a stable way, even the free version of AE

I have a problem with that version, I'm not (member download) and I to saw that didn't work the past version, I didn't pay the privilege, now if I could try the last version and I check that it works then if I become a member

Hi, if I use only the gcode of my project the machine works perfectly, that's what confuses me.
In autoleveller software I can't set the speed, but the movement is not normal, can anyone help me?.

thanks for your help

Hi, I've tried what you tell me but it does not work, I upload a video like work the machin whit Gcode+autoleveller, and I upload you an image of how I configured the limits of the machine. http://i.imgur.com/Y6kTNxD.png https://www.youtube.com/watch?v=4neIo777JGw As you see in the video, the perfor...