Just getting familiar with board'simages handling
An early happy snap
EDIT... whathappened to the image? I tried attaching an image file but no joy.
How do I include an image in the posting?
Trial feature test
Moderator: Country_Bubba
Re: Trial feature test
Ok let's try attachment method.. again...
Re: Trial feature test
SIGH... no joy
screen went through all the motions of transferring etc things
OK the submitted image is 1362 x 1006 pixels....
screen went through all the motions of transferring etc things
OK the submitted image is 1362 x 1006 pixels....
Re: Trial feature test
Hi Zig,
I personally use Picasa (because its free and easy) then use file -> export picture to folder. to resize an image.
I personally use Picasa (because its free and easy) then use file -> export picture to folder. to resize an image.
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.
http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.
-James
http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.
-James
-
Country_Bubba
- Posts: 124
- Joined: Wed Oct 02, 2013 3:07 pm
- Location: LaGrange, GA USA
- Contact:
Re: Trial feature test
Zig,
As daedelus noted in the other thread, the max size is:
"The restrictions are... attachments must be less than 256kb and a maximum of 640x480px."
As daedelus noted in the other thread, the max size is:
"The restrictions are... attachments must be less than 256kb and a maximum of 640x480px."
Art
Country Bubba
Country Bubba
Re: Trial feature test
Just a short test of attaching a photo. Yep, it seems to work - I took an image, then in photo editing I sized as 640X480 pixels and it seems to work good.
Ken H>
Ken H>
- Attachments
-
- T-Handles_Test.jpg (58.04 KiB) Viewed 12932 times