I can't download autoleveller from the autor page
I can't download autoleveller from the autor page
When i try to get acces to the www.autoleveller.co.uk i get http error 500. somebody know how solve this issue.
- Country_Bubba
- Posts: 124
- Joined: Wed Oct 02, 2013 3:07 pm
- Location: LaGrange, GA USA
- Contact:
Re: I can't download autoleveller from the autor page
HI,
I just tried to get into the sight and like you couldn't.
The best I can do and have done is write an email to James, the owner to see if he can get it fixed.
Country Bubba
Moderator
I just tried to get into the sight and like you couldn't.
The best I can do and have done is write an email to James, the owner to see if he can get it fixed.
Country Bubba
Moderator
Art
Country Bubba
Country Bubba
Re: I can't download autoleveller from the autor page
Good point. Its not working for me either.
This occasionaly happens with my web host and it usually sorts itself out soon. Check tomorrow and I will do the same. If its still not working I shall delve deeper and bang some heads together.
Cheers,
This occasionaly happens with my web host and it usually sorts itself out soon. Check tomorrow and I will do the same. If its still not working I shall delve deeper and bang some heads together.
Cheers,
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.
http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.
-James
http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.
-James
Re: I can't download autoleveller from the autor page
Yep, still not working.
The staff at my web host are not as active due to COVID I guess, so i'm not sure how long it will take to fix. I'll let you know here when its resolved.
The staff at my web host are not as active due to COVID I guess, so i'm not sure how long it will take to fix. I'll let you know here when its resolved.
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.
http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.
-James
http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.
-James
Re: I can't download autoleveller from the autor page
Should be up and running now.
http://www.autoleveller.co.uk/. Software to probe and adjust a GCode file for PCB's or any probe-able surface.
http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.
-James
http://www.autoleveller.co.uk/cnc-probe-guide/. A short guide to setting up the probe.
-James
- Country_Bubba
- Posts: 124
- Joined: Wed Oct 02, 2013 3:07 pm
- Location: LaGrange, GA USA
- Contact:
Re: I can't download autoleveller from the autor page
Yep, works for me also.
Looks like all is restored.
Thanks James.

Looks like all is restored.
Thanks James.
Art
Country Bubba
Country Bubba